Graphtec Flatbed Cutting Plotter FC4500
|FOB Price:||US $0.1 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $0.1/ Piece|
|Production Capacity:||1000000PCS Per Year|
|Transport Package:||in Wooden Case|
|Payment Terms:||T/T, Western Union|
- Model NO.: FC4500-50
- Type: Garment
- Trademark: Graphtec
- Origin: Made in Japan
- Certification: CE, ISO, FDA
- Automatic Grade: Automatic
- Specification: CE
Flatbed Cutting Plotters are used for a wide range of industrial applications and processes. Max. 750 mm/S cutting speed for high performance and productivity from your desk-top model
Has a good selection of tools so suitable for various processes
Precise control of contour cut, half cut, perforated cut, and plotting.
Ideal for creating samples or small production runs.
Suitable for print and cut using ARMS
Equipped the ARMS (Advanced Registration Mark Sensing system). Easy and accurate cutting of pre-printed images using Cutting Master 2. Enables higher productivity of POP, stickers and prototype cartons.
Work with harder, thicker, and thinner materials
Suitable for PET (polyethylene terephthalate), Polyamide, Stiff paper, Cardboard, Microflute board or Industrial materials with precise adjustable cut pressure up to 600gf.
Enhanced functions for higher productivity
Repeated cutting function
This function enables multi pass cutting to be performed on a medium that cannot be cut with a single cutting operation.
2-Tool holders for easy selection
Two tools can be mounted at the same time for easy switching. If the cutter blade and the creasing tool are mounted at the same time, cutting and scoring operations are performed automatically for higher productivity.
Note: The second tool is held by magnetic force on the FC4500-50 so the choice of tool is limited.
The spacing between the two lines indicated by the arrows should be approximately equal to the thickness of the substrate.
However, the type of substrate being scored and the temperature and humidity of the working environment can all affect the ideal value. Please adjust the settings to suit your own conditions.
Simple creasing function
A simple function to create fold lines for clean folding on micro-flute and cardboard has been enabled.
· Up to three fold lines can be selected.
· If two or three fold lines have been selected, the spacing between the lines can also be specified.
· Repeated creasing operations can also be specified for each of the lines.
How to determine the number of crasing lines
· Single-line: Substrates up to 0.1 mm thick
· Double-line: Paperboard 0.1 to 0.5 mm thick
· Triple-line: Rigid cardboard 0.3 to 0.5 mm thick
Advanced reverse-side cutting / creasing function
Cutting and creasing can be carried out from reverse-side when using the registration marks. This prevents crease line from appearing on the printed surface.
Graphtec's proprietary tangential emulation provides precise and clean cutting even on thicker material, ensuring sharp edges and corners.
Advanced Registration Mark Sensing system
Automatic ARMS sensitivity adjustment
The sensitivity of the Mark sensor can be adjusted to match the cutting media, it enables the use of various colors of media & registration marks.
Windows Vista / XP / 2000, Mac OSX 10.2 - 10.5
Adobe Illustrator, CorelDRAW
Strong Service Support:
10 year's exporting experience help you with professional documentaries, shipping matters, importing guidance and timely follow-up notice. Make you whole process worry-free!
One year warranty! Online skill training till you can operate! Professional technician provide with lifelong support to make you feel worry-free to use, buy and profit!
|Configuration||Digital servo system, Flatbed|
|Media hold-down method||Electrostatic adhesion or Adhesive sheet||Adhesive mat or Adhesive sheet|
|Effective cutting area||590 x 430 mm (23.2 x 16.9 inch)||860 x 600 mm (33.8 x 23.6 inch)|
|Mountable media||500 mm (19.6 inch) (Y-axis direction)||666 mm (26.2 inch) (Y-axis direction)|
Marking film (vinyl, fluorescent and reflective)
Stiff paper/card (for stencils etc. ) up to 0.5 mm thick *1
Polystyrene foam sheets up to 0.8 mm thick *2
Sandblast rubber sheets up to 1.0 mm thick *2
Microflute board (F/G grades)
Clear sheets for plastic boxes
High-intensity reflective film *3
|Maximum cutting speed||750 mm/s (30 inch/s) (1 to 75 cm/s in 23 steps)|
Tool 1: Max. 5.88 N (600 gf), in 48 steps
Tool 2: Max. 2.94 N (300 gf), in 30 steps
|Tool 1, Tool 2: Max. 5.88 N (600 gf), in 48 steps|
|Minimum character size||approx. 5 mm square (varies with the character font and media)|
|Mechanical resolution||0.005 mm (5 μ m)|
|Programmable resolution||GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL ™ *4 : 0.025 mm|
|Distance accuracy||Max 0.2% of the distance moved or 0.1 mm, whichever is lager *5|
|Perpendicularity||Max 0.3 mm / 430 mm||Max 0.4 mm / 610 mm|
|Repeatability||Max 0.1 mm *5|
|Standard interfaces||RS-232C, USB2.0 (Full speed)|
|Buffer memory||2 Mbyte|
|Command sets||GP-GL and HP-GL ™ *4 emulation (selected by menu)|
|Number of tools||2 tools|
|Cutter blade, pen, and tool types||
Cutter blade: supersteel
Pens: Water-based fiber-tip pen, oil-based ballpoint pen
|Others||ARMS (Advanced Registration Mark Sensing System), Reverse-side cutting and creasing with ARMS, Copy function, Creasing function, Repeatedly cut function|
|Power supply||100 to 240 VAC, 50/60 Hz (Auto switching)|
|Power consumption||Max. 120 VA|
Temperature: +10 to +35 degree C (44 to 95 degree F) ,
Humidity: 35 to 75% RH (non-condensing)
|Guaranteed accuracy environment||
Temperature: +16 to +32 degree C (55 to 90 degree F),
Humidity: 35% to 70% RH (non-condensing)
(W x D x H) ,
Tolerance +/- 5mm
857 x 780 x 200 mm
(33.7 x 30.7 x 7.9 inch)
1172 x 962 x 200 mm *6
(46.1 x 37.9 x 7.9 inch)
|Weight||approx. 19 kg (42 lbs. )||approx. 27 kg *6 (60 lbs. )|
|Compatible OS||Windows 2000 / Windows XP / Windows Vista, Macintosh OS10.2-10.5|
|Certifications||UL, cUL, CE making, FCC-A, EN55022-A, RoHS|